Learn About Garbage Disposal Replacement

In the event that your trash disposal is starting to fail or is completely not functioning, there are easy steps that you can follow to pinpoint and correct the issue before making an appointment for garbage disposal repair & installation with a plumber or even replacing the appliance. Sometimes, the device is just jammed or has a different fixable issue.

Image Source Google

First step turning off the disposal and then depress the reset switch on the device. It will be either on the bottom of the side. Press the button with firmness and completeness. button. Re-turn the disposal on and check the response.

If there is no response from the unit, look at the circuit breaker to see if there is the possibility of a fuse having been blown out or tripped. If everything is okay-check the outlet to confirm that there is the power to the unit. Plug another appliance into the outlet to see whether it functions.

If all of these are in order There is a chance that the cable running through the device has become short or is disconnected. It is necessary to take apart the device to make sure that all wires are secure. The conclusion that comes to mind could be that your motor is failed In this case, you'll need to replace the disposal unit.

If you suspect an obstruction inside the unit, disconnect the disposal and turn off the power on the breaker panel to avoid accidents. A lot of disposals come with the ability to use a specific tool that allows you to manually turn the blade.